As an Amazon Associate I earn from qualifying purchases.
Wood burning is a process by which one can write and design images on the wood using a wood burning tool. In this process, the tool’s pen tip or nib is heated to a certain temperature to burn the wood.
Those who didn’t use a wood burning tool and want to buy a suitable burning tool can’t assume how hot a wood burning tool gets so that they can do their preferable job. to make their job done.
A wood burning tool can be heated up to 1382 °F on the claims of some of the most popular brands, and the temperature can be adjustable for different work purposes required.
Let’s discuss more how hot does a wood burning tool get on different types of a wood burner.
How hot does a wood-burning tool get?
In the past, people used to fire a metal plate to heat it and use it to design wood or leather. But later on, multiple designs and functioned burning tools comes where electricity was used instant of fire.
In this modern time, a wood burner tool’s temperature can reach from 100 to 1382 °F. As there are two different wood burning tools or pyrography pens this temperature mark depends on those two different pens.
One is a Wire nib burner and another one is a solid point burner. On the Wire nib burner, there used solid wire which can absorb or go through extremely high temperatures. It can reach up to 1382 degrees Fahrenheit.
On the solid point burner, there used solid metal that can break at extremely high temperatures. It can reach up to 950 degrees Fahrenheit.
In the modern burning tool model, there used resistance that will not extend its temperature limit and also have a variable temperature control switch on which you can select and fix the heat of the tool for an exact temperature and adjusts between approximately any degrees Fahrenheit.
Note: modern tools won’t extend their provided temperature even if you keep it ideal for a long time.
Note: this temperature limit and control varies different model to model. One may have a higher heating capability and the other may have a lower one.
Which temperature is ideal for wood burning?
The burning temperature depends on the wood you are using. Like harder woods need higher temperatures and softer woods need a lower temperature. Another hand if your wood has moisture, it needs a higher temperature to burn and dry woods need less temperature.
Note: you can use higher temperature on softer and dry woods but the more you higher your temperature, the more you have moved your hand faster neither the wood you are designing can burn way deeper and make ashes that won’t look nice.
A wood-burning tool mostly starts working well around 500 degrees Fahrenheit temperature. So, depending on your wood you can adjust your burning pen temperature from 600 to 900 °F.
Note: if you are working in cold weather you have to keep your pyrography pen at a higher temperature to work on a good flow and perfectly.
You may have a burning pen that can produce more than 1000 degrees Fahrenheit temperature but working on this 600 to 900 °F temperature help you to work more fluently on any wood.
Note: You can also try higher and lower temperatures on different woods to have your own working fluency.
Which wood-burning tool is better?
There are two types of burner tools available in the market. One is a solid point burner and another is a Wire nib burner. Both have their own advantages and disadvantages which make them good or bad for different works.
Solid point burner:
solid point burner creates heat within the pen and transferred it to the tip. The shape tips head are made of solid materials. They come in different particular shapes to make pyrography. Also, particular shape tips can switch at any time.
Note: you can try Walnut Hollow Creative Versa Tool and Walnut Hollow Creative Wood burner Solid point burner pens.
Wire nib burner:
wire nib uses electric current and going through the pen it creates heat on the nib. The burning loops are made of solid wire and shaped differently to make pyrography.
Wire nib burners have a thinner body than the solid point burner to hold the pyrography pen easily to create detail and write more cleanly and perfectly. Wire nib burner’s wood burning tool can create a great amount of heat within a few seconds and can make your work faster and easier.
Q. Is high or low temperature good when working on a wood burner tool?
Ans: on high-temperature wood burning tool burns wood fast so you have to move your hand fast neither it will deep burn your wood and make ashes.
Another hand, low-temperature wood will burn slowly and you get more control over work but the burning may not look up to the mark.
So, if you are a beginner go with a low temperature and increase the temperature slowly to design finely and fluently. Recommend you to work on 600 to 900 degrees Fahrenheit temperature for any wood.
Q. How do you use a wood burner tool?
Ans: first transfer a design on the wood or leather using carbon paper or draw a design. Then turn on the switch, adjust the temperature and keep it to heat properly at the temperature you set.
After that hold the pyrography pen tightly but flexibly to move the pen easily on the design, start with an outline then do an inside line and move the burning pen fast so that you get a better result. After a few burns rub the pen nib over a sanding block to remove wastages.
Note: The longer time you hold the tip or nib on a point it will make the burn deeper and darker. You should burn with the grain to have less resistance than against the grain.
Q. What is an important safety tip when you are doing pyrography?
Ans: While doing pyrography you should be concerned about safety sides:
1. Burning a block of wood or leather can release toxicity so always wear goggles and a mask,
2. If a burning tool tip or nib heats too much for heat protection wear a heat protection finger guard,
3. After your work always turns off the switch.
Q. How to change a wood burner tool tip or nib?
Ans: changing a wood burner tool tip or nib is easier but you have to be careful. Changing the Solid point burner tip and Wire nib burner is a little bit different from each other.
No matter which wood burning tool you are using, if you are changing the burner tool tip or nib while making the design, first let the pen cool down or use a pair of pliers to hold or grab the tip or nib.
If you are changing the Solid point burner then hold the tip and unscrew it anticlockwise and attach a new tip clockwise.
If you are changing the Wire nib burner nib then hold the pen tight, then loosen the screws attached on the top of the nib, insert a new nib and tighten the screws.
Q. How long should I let my wood-burning tool heat up?
heating up a burning tool won’t take much time but if you set the temperature on high or even you didn’t set any temperature, let the wood burning tool heat for around 5 minutes to heat up the tip or nib properly. After heating up make sure to draw on waste wood before dawning on the main project.
Different brands of wood-burning tools make different models. Some of the models functioned to heat up to 1382 °F and some models functioned to heat a little bit lower.
Also, the heat temperature varies on the two types of wood burners. Where the Solid point burner heat less and the Wire nib burner heat higher than the Solid point burner, up to 1382 °F.
I hope read the article well and got the answer to how hot does a wood-burning tool get and which wood burner heat more! Thank you.